Material Lab Equipment

Universal Testing Machine. CAP. 200TONS

Approx Price: Rs 5 Lakh / Set(s) 
We have available with us a precision engineered range of universal testing machines. These machines are customized as per the specifications of our clients and are offered at industry leading prices. Our range is qualitatively superior and is available in various models such as:

Universal Testing Machine 10 Tons


  • CAP with standard accessories for Compression, Tension, & Transverse Test with 4 range 0-10kN, 0-25kN, 0-50kN & 0- 100kN
  • Electronic also available

Universal Testing Machine 20 Tons


  • CAP with standard accessories for Compression, Tension & Transverse Test with 4 range 0-20kN, 0-50kN, 0-100kN & 0- 200kN 

Universal Testing Machine 40 Tons


  • CAP with standard accessories for Compression, Tension, & Transverse Test with 3 range 0-40kN, 0-100kN, 0-200kN & 0-400kN 

Universal Testing Machine 60 Tons


  • CAP with standard accessories for Compression, Tension, & Transverse Test with 3 range 0-60kN, 0-120kN, 0-300kN & 0-600kN 

Universal Testing Machine: Capacity: 60MT


  • (600kN)
  • Model PMT-1E-60 (Electronic)
  • Complete with loading unit, hydraulic power pack, electronic control panel & clamping jaws
  • Round & flat specimen complete with standard accessories
  • Suitable for operation on 440Volts, 3 phase A.C. supply

 Universal Testing Machine: 100 Tons

  • CAP with standard accessories for Compression, Tension, & Transverse Test
  • 4 ranges available from 0-100kN, 0-250kN, 0-500kN & 0-1000kN
  • Clearance for tensile at fully working piston(50-850mm)
  • Clearance for compression test at fully descended working piston (0-850mm)
  • Clearance between columns (750mm), Ram stroke(250 mm), Straining piston speeds(0- 80 mm/min) at no load
  • Power (3.5 HP)
  • Volts (400-440)

Universal Testing Machine, capacity: 100MT

  •  (1000kN)
  • Model PMT:1E:100
  • (Electronic) model
  • Complete with loading unit, hydraulic power pack, electronic control panel & clamping jaws
  • Round & flat specimen complete with standard accessories
  • Suitable for operation on 440Volts
  • 3 phase A.C. supply.

Tensile Tester

Approx Price: Rs 48,000 / Set(s) 
We are manufacturing a precision engineered range of Tensile Testing Machines which is suitable for testing tensile strength and elongation of different various material. Our range is customized as per the specifications of our clients and complies with various industrial standards.

Some specifications of our range are as follows:


  • Cap. 250Kgf
  • 3 ranges available; 0-50x100gm, 0-100kgf x 200gm, & 0-250kgf x 500gms (specn. Encls)
  • Safety switches one set of grips standard type
  • Suitable to work on 440V 3 ph

Laboratory Jaw Crusher

Approx Price: Rs 80,000 / Set(s) 
.JAW CRUSHER is designed to speed up crushing of Aggregates, Ores. Minerals, Coal, Coke, Chemical etc.. It is compact and rugged in construction suitable for laboratory or small pilot plant. Two jaws of maganese steel are provided in the Jaw crusher. The movable jaw produces two blows for every revolution, thus reducing over sizing to a minimum. A combination of forward and downward and strokes with a rocking action exerts pressure on coarse material, yet permits the finished material to pass through the jaws. A hopper is provided for feeding material. Operation on : 440V, 3Ph, 50Hz, A.C. complete with a 3 H.P. Jaw Size: 100 x 150mm, Max size of feed 50mm (approx) Product discharge(depends on material): 6 to 18mm adjustable, Cap 180kg/hr Same as above but Jaw Size: 150 x 200mm, Max size of feed 100mm (approx) product discharge 10 to 75mm adjustable, Cap 250kg/hr approx.

Laboratory Pulverizer

Approx Price: Rs 70,000 / Set(s) 
A disc type grinder, designed for grinding material to produce a fine mesh sample in one operation. It is a self contained grinder furnished with a rotating disc having a planetary movement in a vertical plane. This feature gives added life to the wearing parts and delivers a product to uniform fineness. The pulverizer will reduce 1 pounds sample of quartz type material to 100 mesh in 1 minute. Maximum feed size is 1/4 inch Grinding is done between two discs, one of which is stationary and the other revolving eccentrically at high speed. The apparatus is supplied with heat treated disc of 7 inches in diameter Adjustment for size of product may be made by use of a convenient hand wheel while the machine is in operation or at rest. A self locking device holds the hinged grinding chamber in place and affords easy and quick access to the grinding chamber for removal of ground samples and for cleaning The pulverizer is supplied complete with a 3 H.P. motor, starting switch, V-belt puly drive and mounting. Electrical requirements are 440 volts, 3 phase A.C. Disc diameter: 175mm. Maximum feed size: 8 mm (approx) Size of finished Product: 100 mesh to 150 mesh.

LOS Angeles Testing Machine

Approx Price: Rs 35,000 / Set(s) 
We have been offering a wide range of loa angles testing machine which is customized as per the specifications of our clients. Our range is fabricated using high grade raw material and complies with leading industrial standards.

Specifications:


  • Consist of a hollow cylinder closed at both end mounted horizontally on a strong frame, with inside dia 700mm x 500mm length
  • Suitable for 440V 3 phase operation mounted horizontally on a strong frame on ball
  • Bearings
  • Along with the machine a tray is supplied for collection of the material at the end of the test
  • An opening closed with a dust tight cover to facilitate charging and discharging the drum with the material under test
  • A detachable shelf extends throughout the inside length of the drum catches the abrasive charge and does not permit it to fall on the cover
  • The drum is rotated by an electric motor through a heavy reduction gear at a speed of 30-33 r.p.m.
  • A revolution counter fitted to the frame
  • Complete with abrasive charges consisting of a set of twelve hardened steel balls, approximately 48mm diameter

Determination Apparatus

We have been offering a wide range of dimension apparatus which is manufactured in accordance with various industrial specifications. These are customized as per the specifications of our clients and are offered at industry leading prices.

Specifications:


  • Max Bending 200kgcm
  • Range 30-100kgcm I, 100- 200kgcm II, Griping Dia 12mm, Testing dia 8mm
  • Rotating Speed 4200 rpm
  • Accuracy of applied bending movement ±
  • Digital electronic counter - Main supply 440V, 3 ph  

Bar Or Compound Pendulum :


  • Consist of steel nickelled bar 100cm long bored at equal intervals

Bearings:

  •  Various: 25mm Size mounted on wooden base set of four, Ball, Roller, Taper, Thrust bearings 

BELL CRANK LEVER:


  • A wooden right angled lever with fulcrum at an angle
  • A spring balance with adjustable wingnut
  • Complete with 1 kg weight

Bending Moment Apparatus:

  • Consisting of a well seasoned wooden beam 180cm long hinged at a distance of 60cm from one end spring balance is with adjusting screw so as to compensate the initial extension of the spring
  • U shape sliding weight stand etc

Bending Of Beam Apparatus:

  • Consisting of two dial type compression balances of 10kg capacity, fixed on wooden polished board, a wooden bar with steel back plate
  • Complete with stirrups, hooks and weights 

Combined Coil & Belt Friction:


  • Consists of a metallic pulley of 30cm Dia.
  • With two grooves one for the belt one for the rope
  • Circular wooden disc graduated at 10 Deg interval
  • Complete with one belt one rope - The unit is mounted on vertical stand - but without weights 

Combined Inclined Plane Friction Slide:


  • Consisting of a wooden plane 90x18cm having adjustment for setting the required angle precisely
  • Complete with frictionless pulley, linear and circular scale, pan a wheeled trolley, a set of slides having different bottom, without weight

Applied Mechanics

Approx Price: Rs 6,000 / Set(s) 
We manufacture a wide range of applied mechanics which is customized as per the specifications of our clients. This range complies with various industrial standards and possess following specifications:

  • Consisting of a wooden plane 60x15cm having adjustment for setting the required angle precisely
  • Complete with frictionless pulley, linear and circular scale pan a wheeled trolley, a set of slides having different bottom, and set of weights
  • One weight box (each of 5 gm, 10 gm, 2- 20 gm, 2-50 gm, 2-100 gm weight), Boxes each weighing 300 gm

Centrifugal Force Apparatus:
 
  • With this trouble free unit mathematical expression for the centripetal force developed by a body moving uniformly in circular motion can be verified with good precision
  • In this design two masses moving on ball bearing are carefully preportioned so that equilibrium can be obtained at moderate speed
  • Complete with revolution counter, specially made spring dynamometer and with hand rotating device

Double Purchase Winch Crab:

  • Fitted with CI wall brackets
  • The grooved wheel is of 25cm dia. and Gears are machined cut with double set of gearing arrangement

Fletcher Trolley:

  • All metal, capable of being assembled and dismantled easily
  • Cylindrical weight is fitted with wheels which run with little friction on a track of two steel rods 150cm long

Flywheel Apparatus

  • 20cm Dia
  • Comprising carefully machined & balanced CI wheel
  • Wheel is smoothly painted black
  • A pointer is fixed to one of the brackets
  • Diametric hole is drilled in the shaft to take a pin & cord
The base is provided with holes for the apparatus to mount on the wall


Gear Models


  • Various: Spur Gears, Bevel Gears, Helical Gears, Spiral Gears all mounted on board 
Gyroscope

  • Standard: Brass wheel is 7.5cm dia and 3cm at its rim carefully balanced and all the three pairs of pivots are adjustable
  • Complete fitted on metal base

Roll Crusher

This comprises of two hardened alloy steel rollers with 100 mm. faces and 250 mm diameters. The rollers are fitted to a steel shaft and are mounted on heavy duty gunmetal bearings. The outside bearings are provided with heavy duty compression springs, which help in increasing the space between the rolls, when a piece of material cannot be crushed. Square threaded holts are provided to adjust the gap between the rolls. The drive is by a heavy duty motor, through ‘V’ belts to a set of gears and further to the rollers. A hopper is provided for feeding the material. The whole arrangement is mounted on a fabricated steel frame. Supplied complete with a 3.0 H.P. motor wired for 440 V, 3 ph. 50 Hz., and starter Feed size: 10 mm (maximum) Product Out put size: 2 mm. And below

Universal Testing Machine

Approx Price: Rs 5 Lakh / Set(s) 
UTM having cap. from 5kn to 2000Kn - Suitable for testing wide range of products - Available in Standard, Digital & Fully Computerize version.
Looking for Material Lab Equipment ?
© Acquavir International
 
Desktop Site Back to top